x360dock

Monday, October 31, 2011

x360dock Review is Available Now !

Today,GBA released a review for x360dock.As we knew,GBA Forum is a very famous forum for our players.i have quoted from them and shared with all of your guys.Now,let's have a look at what's the special views for x360dock first.

Quoted from GBA Forum

"Manufactured by: Team x360dock
official Agent : digitopz.com

price : 75USD with free shipping
 
By Devin

Review Contents & Index:
  • Introduction

    - Official Feature List

  • Packaging and Contents
  • Design, and Impressions
  • Set-up and Usage

    -Hardware Installation

    -Software Set-up
  • Performance, and Compatibility

    -Xbox 360

    -Original Xbox
  • Conclusion
Introduction

The x360dock is a USB ISO Loader for the Microsoft Xbox 360 console priced between $72.95, to $90 USD. . It allows you to play downloaded Xbox 360 ISOs from the internet on your Xbox 360 console, without having to install modified firmware on your disc drive. The x360dock is quite unique. It allows you to play ISOs directly off your computer's internal hard drive, by using a standard Mini USB cable. So no need to go out, and buy a external hard drive. Similar Xbox 360 USB ISO Loaders do not have this feature, and are priced a bit higher than the x360dock at the time of me writing this review.
Official Features List

Direct PC HDD USB ISO Loading. The x360dock allows you to play ISO games directly off of your computer's internal hard drive.
Clean Mode. This feature allows the x360dock to still function, even after Microsoft releases a update to the Xbox 360 console.
A nice friendly GUI. The GUI is very simple, and easy to use.
Solderless. No need for any additional tools for installation.
Compatibility The x360dock works with all Xbox 360's, except for those with certain disc drives. A compatibility table can be found below.
AP25 support Games with the AP26 Anti-Piracy measures can play just fine.
XGD3 support Games in XDG3 Format play just fine.
Plug and Play The x360dock can be assembled, and disassembled as many times as wanted to different Xbox 360's. However in order to use the x360dock, you must have your Xbox 360's disc drive keys, which are different for every Xbox 360. To obtain the keys, additional hardware is needed.
Power Reduction The x360dock, makes it so the original disc drive in your Xbox 360 doesn't have to work. By doing so your disc drive's lens isn't as stressed, and the disc drive doesn't have to consume as much power.
USB 2.0 support The x360dock supports USB 2.0, meaning that you can transfer data faster to the Xbox 360 console.
DVD/DL/Multigame compatible The x360dock allows you to play games that have multiple discs, as has support for single layer games.
Full upgradeable by USB/JTAG. The x360dock's firmware can be upgraded via USB cable, or by a JTAG programming cable.
Drive mode This feature allows you to use your Xbox 360's original disc drive, in order to play legitimate disc games.

Packaging, and Contents


•Sata Cable
•Power Cable
•x360dock Board
•Ribbon Cable
•Sticky Padding

Posted Image

Design, and Impressions

Design

 
The x360dock motherboard itself has a nice feel to it, very sturdy doesn't feel like it'd break if bent a little bit. The board itself is very nicely labeled in white text where everything should connect to. Such as the Sata/Power cables to the disc drive, and Xbox 360 motherboard.Very user friendly. The Sata, and power cable are standard edition, but they are a bit longer to accommodate the installation. Next up is the USB Dongle, the plastic feels a bit cheap. It has a greasy feel to it, but other than that it serves it's purpose very well. The x360dock team was even nice enough to make it a pass through, so you won't have to dedicate one of your USB Ports to the x360dock. Lastly, is the Ribbon Cable. Although it's pictures may make it look easily snappable, it's quite sturdy as well as flexible in order to suit the needs of slipping through the insides of your Xbox 360.

Posted Image

Impressions

 
At first, I was a bit skeptical at the USB Loaders. After being on the Xbox scene for quite some time, at which only JTAG's or Xbox's with the Reset Glitch Hack were able to USB Load games so the USB Loader looked like paradise. Only there was a catch, they were expensive. If you don't already know, I'm a very cheap cheap person, so the x360dock with it's low price greatly interested me. The price, as well as the fact that it's solder less were a key component. As a bonus, it allowed me to USB Load games directly from my PC's HDD. Instead of having to buy a external HDD. The install is simple just plug it into your Xbox 360, connect all the wires, and connect it to your PC. Run the simple software, and you're off. With my experience with the x360dock, I'd say it's definitely worth the buy. Especially if you don't have the money to grab a expensive disc drive emulator, such as the x360 key. A few other features, as well as a hardware revision will make this a must buy for the Xbox 360 consumer. The team promises to make it Xbox Live safe, and add in a DVD Drive Key extraction feature in a later update. The new revision coming out in a few months is a touch screen remote, that is bundled with the x360dock that allows you to plug in a external HDD to play games, the touch screen allows you to select your games by looking at the case art. Lastly, a few things to mention. The x360dock team mentions the ability to survive Dashboard updates, using a clean feature. The x360dock doesn't modify your Disc Drive in any way, so Microsoft won't see that it's been modified keeping it from getting patched. Whether, or not it's detectable on Xbox Live has yet to be determined.

Set-up and Usage

Hardware
 
The x360dock installation process is quite simple, it's just plug and play. Just open up your Xbox 360, exposing the bare motherboard. Disconnect your disc drive from the Xbox 360, connect the sata and power cables to the x360dock, connect the disc drive to the x360dock using the cables provided with the x360dock. Then slide the ribbon cable into the x360dock's clip labeled USB, make sure it's securely locked into place afterwards slide the slip through the spacing beside the Xbox 360's AV cable port. Carefully proceed to close up your Xbox 360, making sure not to catch the ribbon cable on anything. Now, take the end of the ribbon cable sticking out of the spacing beside the AV cable port, and connect it to the clip on the USB dongle included. Plug the USB Dongle into your Xbox 360's back USB port, and connect it you your PC by plugging in the Mini USB cable. Now, boot up the Xbox 360 while the USB Dongle is connected to your PC. Windows should prompt you for a driver for it, guide Windows to the driver, and it should install successfully. Once done, take your Xbox 360 Drive keys and put them in the same directory as the x360dock program.(Which you can download from the x360dock site, as well as the latest firmware and drivers.) Click the button labeled "Set Up", and choose what Xbox 360 you are using. After that, you may click "Open ISO" which will prompt you to choose a ISO from your computer to play, or you may click "Open ISO with Reboot" which will prompt you to select a ISO from your computer, and once selected it'll reboot the Xbox 360 and then proceeds to load the ISO. Overall the installation process took me 25 minutes, but even if you're new to the Xbox 360 scene, it should only take you about 45 minutes to install the x360dock. The following pictures are of my quick installation of the x360dock, as well as a few pictures of the board itself.

Posted Image
Posted Image
Posted Image
Posted Image

Software

 
The x360dock software is extremely novice friendly, it allows the user to select a ISO to boot, and how it is to boot. Here are the options.

Set Up Allows you to choose what Xbox 360 console you are currently using with the x360dock.

Posted Image

Open ISO Allows the user to select a ISO from their computer for the x360dock to load.

Open ISO With Reboot Allows the user to select a ISO from their computer, and reboots the Xbox 360 and proceeds to load the ISO.

Drive Mode Allows the user to use the Xbox 360's original disc drive to play discs.

Posted Image

Posted Image
Performance, and Compatibility

Xbox 360

Posted Image Dead Island
Posted Image Driver: San Franscisco
Posted Image Sonic Generations
Posted Image Dragon Ball Z: Ultimate Tenkaichi
Posted Image Batman: Arkham City
Posted Image X-Men: Destiny
Posted Image Dead Rising 2: Off The Records
Posted Image Battlefield 3
Posted Image Rise Of Nightmares
Posted Image Gears Of War 3
Posted Image Halo 3
Posted Image Call Of Duty: Black Ops
Posted Image Call Of Duty: Modern Warfare 2
Posted Image Catherine
Posted Image Alice: Madness Returns

From the selection of games I've tried above, 100% of the games worked perfectly.. Regardless of whether, or not the game had anti piracy measures such as AP25, or is in XDG3 format. The x360dock doesn't support Homebrew, only Microsoft signed games. If you were to edit a ISO, it will not boot on the Xbox 360.

Original Xbox

Posted Image Shenmue 2
Posted Image Halo: Combat Evolved
Posted Image Fight Night: Round 2
Posted Image Halo 2
Posted Image Just Cause

None of the original Xbox games I tested booted. The disc drive blade just sticks at the "Reading" screen. No ISOs were able to boot, but I've gotten word from the x360dock team, that Xbox original games will be supported in a later update. The x360dock doesn't support Homebrew, only Microsoft signed games. If you were to edit a ISO, it will not boot on the Xbox 360.

Conclusion

If I had to rate the x360dock, I'd give it a 9, out of 10. There's only a few minor issues that prevent it from getting a 10, first off is the x360dock board itself. The board could use a case, wouldn't want to short circuit if something metal were to hit it while it was in your Xbox 360. It would also look a bit nicer, not that you'd be seeing it that often. The USB dongle feels a bit cheap, as I've mentioned before, and the position of the clip inside it makes it a bit difficult to snap down to secure the ribbon cable in place. Other than those two issues, the x360dock is a wonderful USB Loader that has some very nice functions, and a great price in comparison to the other Xbox 360 USB Loaders.



Wednesday, October 26, 2011

What is x360dock Module 1 and Module 2 ?

As most of us knew, x360dock is a new items for xbox360.Yet,when checking its official features,maybe some players feel some confusion about x360dock Module 1 and Module 2.Now,let's see following quote first to get a general  information of them

" x360dock module1 without remote: A pc/laptop required. After you install the X360dock,just use a normal USB cable to connect the X360dock to your PC. Run our software in the PC and choose the games(which saved in your PC hard disk,), very easy. The PC is a external hdd you know, you can save all of your iso games in it. 

X360dock module2 with touch screen remote: Don't need the PC, just connect your external hdd to the remote, and use the remote to choose the games" 

In fact, x360dock Module 1 and Module 2 are same items,the only difference lies in Module 2 will come with a touch remote.In a simple word,Module 1 is the first generation of x360jailbreak without remote controller,Module 2 is the incoming generation,which will come with a touch LCD Screen Remote,so,users dont need use a PC any more.and this touch controller can be used on Module 1 too.Wow,it seems that x360dock very charming ! n_n !



Saturday, October 15, 2011

X360dock Review

As we have known,x360dock is another jailbreak items for xbox360.The official didnt release any news about it till it was out.So,this blog will give you a more detailed information about x360dock,it was just a simple reivew,not professional one.

Who is x360dock ?

X360dock is a solderless USB loader for Xbox 360,by which we can  play games from our external hdd abd we dont need to worry about the games being damaged. Moreover, we no longer use the DVD drive and so it will extend the life of your console.


Picture
Package Content
  1. X360key LCD screen device
  2. X360key board
  3. 128M SD card
  4. A sata cable
  5. A USB cable
  6. A drive power cable
 Features List

1. Nice UI.
2. No soldering job needed.
3. Compatible with all fat xbox 360 drive types and most slim types.
4. Upgradable via USB storage
5. AP25 protection emulation



X360dock Incoming Features

1. xbox live
2. Compatible with all slim models
3. Retrieve the key from your DVD drive without any extra tools.



x360dock compatibility
 








The Comparison of xk3y and x360dock

Similar

1.Both x360key and x360dock can hack xbox360 so that we can play games from our external harddrive.

2.They are a solderless USB loader for Xbox 360.
3.Support all fat xbox 360 consoles and most slim types.
4.Require retrieve the key from our DVD drive before installing.

Difference


1.x360dock can support multi-language version,yet,the xk3y at present,just supports Asian Verison and it was said that the Asian version will never support European languages (and the ISO menu will go Asian only soon too).


2.xkey with a outer controller to controller xkey,yet,x36odock needs a compture to manage,maybe it will improve later.


3.x360dock is cheaper than x360dock.


How to install X360dock

X360dock is a solderless deivce which means you can install it without any soldering skills, this is a great news for users. After all, not so many guys are capable of doing the complicated soldering job. In order to install the x360dock, you need to  open the console, put the x360dock inside, connect some cables, put the firmware inside and close the console. You can install it easily via our guide.


Today,the official has released a video guide,so i post here for sharing :



Tips: Installing the x360dock requires a copy of your xbox360 drive key which means you need to use some tools such as  x360USB pro & CK3 Lite to retrieve the key from your DVD drive. If you already have got the key file in advance, that's great!




Thursday, October 13, 2011

Who is X360dock ?

X360dock team has announced that their x360dock for xbox360 is available.Then who is x360 dock ? please reading folloing content to get more details :

So called x360 dock,is a solderless USB loader for Xbox 360, you can use it to play games from your external hdd. With this device, you can throw away your game disks, you dont need to worry about the games being damaged. Moreover, you no longer use the DVD drive and so it will extend the life of your console.

Here is the pix shows :
 


Features

X360dock Features Now

1. Nice UI.
2. No soldering job needed.
3. Compatible with all fat xbox 360 drive types and most slim types.
4. Upgradable via USB storage
5. AP25 protection emulation

X360dock Future Features

1. xbox live
2. Compatible with all slim models
3. Retrieve the key from your DVD drive without any extra tools.

x360dock compatibility

 

How to install X360dock

X360dock is a solderless deivce which means you can install it without any soldering skills, this is a great news for users. After all, not so many guys are capable of doing the complicated soldering job. In order to install the x360dock, you need to  open the console, put the x360dock inside, connect some cables, put the firmware inside and close the console. You can install it easily via our guide.

Tips: Installing the x360dock requires a copy of your xbox360 drive key which means you need to use some tools such as  x360USB pro & CK3 Lite to retrieve the key from your DVD drive. If you already have got the key file in advance, that's great!

I can't say how quickly and suddently had x360dock team.As we all knew,before this card came out,we just knew xkey,and x360 team didn't relased any information about this item till they finished.I have roughly see this item between xk3y and x360dock,and found that the x360 dock with the same function with xkey,yet,the price is lower than xkey.

What's your opinion about this card ?

Friday, October 7, 2011

xk3y/xkey/x360key Updated News (from October 7th 2011 to October 1st 2011)

Here are all updated news about xk3y/xkey/x360key from(from October 7th 2011 to October 1st 2011) and reading following content to get all informations :

October 1st 2011

xkey goes multi-language.News from the official that their xbox jailbreak will come with Multi-languages supporting,yet,at present,this function is under testing,but the official said that it will come out soon !

October 4th 2011

X360key firmware has been udpated to v1.03.This firmware udpate fixed "updating when USB device is removed" as well as added 0800 Rip support.and you can download this firmware here :  xk3y firmware v1.03

October 7th 2011  
xk3y came to  be on the market and the official said that they will broaden the QC facility from 300 pieces to 800 pieces per day,

October 8th 2011

Development Update: Web interface, API and some more stock on the way!The official said that their engineers are trying their best to let our users controlling our xkey from our iPhone, iPad, or any other device with a browser.please read following quote :

"Engineers from our team have been hard at work implementing a web interface that allows you to control your xk3y from your iPhone, iPad, or any other device with a browser. Expect this feature in a firmware update in the near future! An API is also in the works, paving way for an Android app and more. (The web interface requires the xk3y WiFi dongle, which will be sold separately)."

I thinks these updated news will welcomed by most of our players,after a long time waitting,xkey was finally came out and will be available.Cheers ! I can't wait for----