3D Protective Sticker for xbox360 Note

Just as the name suggested,this is a xbox360 Protective Sticker,which was made of the high-quality three-dimensional material to better protect our main engine.Following is a more detail :

3D Protective Sticker Basic Infor :

Platform : xbox360 

Constitution : it's surface uses the high-quality three-dimensional material,the inside lining is the environmental protection material.

Merits : waterproof, quakeproof, anti-friction, dirty bearable, water washable, and it does not distort, and does not change color either. In addition, advanced screen protection to paste the membrane, the mountaineering buckle, the handwritten pen, the finger pen, enables you more convenient to control your main engine.

Styles : xbox 3D Protective Sticker came with several patterns,such as,CS/God of War Pattern/Mario Tennis and Resident Evil V so on,just like following pics show :

 

How to use this sticker :

you shoud also pay attation that it's a little bit of difficult to paste the membrane in low temperature, the available electric drier blows about one minute then (hot blast). Before pasting, please do scratch the clean main engine surface water-damaged, the grease stains, the dirt.

DG-16D4S Unlocked PCB and Xecuter X360USB Pro instal guide

This article is a detailed guide on how to install DG-16D4S Unlocked PCB and Xecuter X360USB Pro.

Things you need to know before install :

1. Xecuter X360USB Pro and Liteon DG-16D4S DG-16D4S Unlocked PCB ,which take a big role in this process.

2.Some instal knowledge are required as well.

Tip: With X360USB PRO you don't need CK3 Pro drivers, you don't have to use any COM ports (if you don't want the "no Com Ports" message showing up when you boot Jungle Flasher then simply save and run this reg file) and you don't have to have any PortIO stuff installed so no F8 or Driver signing disabled or any of that crap any more (simply tick the USB Only button and all the PortIO stuff gets disabled / ignored) - just ignore all that as it's the old way of doing things - X360USB PRO takes care of ALL of it.

The following tutorial will take you through the simple process of reading a Liteon DG-16D4S DVD Drive (Firmware version 0225) and then installing the Xecuter DG-16D4S Unlocked PCB to that drive and writing new firmware using Jungle Flasher and an X360USB PRO adapter.

Requirements:

Xecuter X360USB Pro
Liteon DG-16D4S DG-16D4S Unlocked PCB (you can also use the PCB that had the Pro Kit installed too)
DVD Drive Power source (the tutorial uses an Xecuter CK3 Pro - but of course you can use a CK3 Lite also)
Sata Cable (Supplied with X360USB Pro)
USB Cable (Supplied with X360USB Pro)
Latest version of Jungle Flasher (Must be v0.1.85 beta and above - Not released just yet)
Latest version of X360USB PRO firmware (must be at least v18)
X360USB PRO Windows Drivers
Windows XP / Vista / 7 - 32bit or 64bit
MAC OSX (Using Parallels, Bootcamp or VMWare)

warning

X360USB PRO AUX Power Cable

The X360USB PRO comes with an AUX Power cable (black cable with DC jack on one end and USB on the other). This is NOT to be used unless it is required. Your X360USB PRO will function with no problems on 99% of USB ports as they have a 500ma output. A tiny amount of USB ports only carry 100ma. The AUX Power is supplied as a worst case scenario for those instances (you would plug it into a USB capable power supply unit such as the iPod's power brick). DO NOT use the AUX Power cable if your computer supports 500ma as you may cause damage to your X360USB PRO. The best way to test is it just set everything up to see if drivers install, jungle flasher detects the drive etc.

Up to the date of this post there are three versions of the Liteon DG-16D4S, the 9504, the 0225 and the 0401. This guide covers the 0225. The stock 0225 PCB cannot be written to without some hardware hacks. This guide covers the Xecuter DG-16D4S Unlocked PCB which is a custom made replacement PCB that is a simply and easy swap with no soldering.

To find out which version of Liteon drive you have simply look at the label and you will see "FW Ver.: XXXX"

Here is an example of the Liteon DG-16D4S DVD label. As you can see we have highlighted the F/W version - in this case it is the 0225.

Before you connect everything you first need to install the X360USB Pro Drivers. These are signed and work in Windows XP / Vista / 7 both 32bit and 64bit. Download the small driverpack and plug in the X360USB PRO USB Cable. When it asks for the drivers simple point to the files you saved and they will install with ease. You are now ready to hook everything else up.

It's very easy to hook up your Liteon DG-16D4S to your PC. Simply connect the DVD power supply (in this case the Xecuter CK3 Pro) to the DVD drive (take care to make sure it is fitted the correct way - the wrong way can damage your drive) and to a molex power cable from your PC or from an external Molex power supply. Then connect the SATA cable from the DVD drive to the X360USB Pro, and then connect the USB cable from the X360USB Pro to a USB port on your Netbook/Notebook/Laptop/Desktop computer.

Remember that you need to be running at least v18 of the X360USB PRO firmware, and that needs to be flashed with at least v0.12 of the X360USB PRO Update Tool. If you don't the latest JF will not work with Slims.



OK we are ready to begin:

1. Load up Jungle Flasher and...

(1) Select the DVDKey 32 Tab
(2) Make sure the I/O Port is set to 0x000
(3) The X360USB PRO should be detected as Primary Master and the Firmware version will be displayed (in this case it is Ver 0.18)
(4) The Liteon DG-16D4S should be detected and ready to work with
(5) Make sure Dummy.bin is ticked
(6) Click on the SlimKey button

2.Choose "NO" when it ask"Do you wish to send unlock to slim?".

3.Now click Yes and then power cycle the drive (Turn the CK3 Pro power off then on)

4. The drive will now kick into vendor mode (0x72)

5.Jungle Flasher will now perform a number of tricks to get the all important drive key.

6.You will be asked to save the Dummy file which contains the important data from your drive such as your drive key. DO NOT LOSE THIS FILE !

7.The following part of the guide is solely to show 3rd party tools working with the X360USB PRO. You must own any game that you backup and we do not condone any kind of piracy and this is purely for educational purposes only. We do not provide any of the LT Plus firmware files and they are not provided or included with Jungle Flasher so do not ask for them. Once the drives firmware has been read Jungle Flasher will ask you if you want to auto-load the Lite-On iXtreme firmware. Click Yes.

8.Everything is now loaded into Jungle Flasher and you are ready to go. lets explain whats happening on the screen at the moment.
(1) The source buffer is loaded with the Dummy.bin from your Liteon DG-16D4S drive. It shows here that it is an 0225 SlimKey extraction.
(2) This is your DVD key - always keep this safe !
(3) This is the iXtreme LT+ firmware auto loaded into the target buffer. This example shows the LT+ v1.9 0225 Firmware which is for the new 2.0.13146.0 dashboard update.

9. At this point you will unplug your DVD drive and now connect the Xecuter DG-16D4S Unlocked PCB (or your custom made PCB with the Pro Kit installed). You don't have to rig it up to your DVD drive chassis just yet - you can simply connect the PCB to the X360USB PRO and the CK3 Pro. Make sure that the power cable is the correct way around from the CK3 Pro and that the WP switch is set to "WP=1". Now you are ready to program the PCB.

(1) Select the MTK Flash 32 tab
(2) Click the I/O refresh button and make sure that the drive properties show that its a PLDS DG-16D4S
(3) Set the drive type to Phat (this is not a mistake)
(4) The PCB will detect as a Liteon Slim
(5) Click the Intro/Device ID button

10. You may need to power cycle if the drive doesn't kick into vendor mode on its first attempt. Most of the time it will kick straight in though.

(1) You are now in Vendor Mode
(2) The drive properties should be on display - everything is looking great !
(3) You will see a new button that says 0x00. This is the SPI Lock Status. 0x00 means it is unlocked and write protection is disabled.

11. Now click on Write. As you can see the write / verify commands are sent very quickly with the X360USB PRO.

12. Now click on the SPI Lock Status button

13. The SPI Lock Status will now change to 0x8C. This means that the Write Protect is now enabled. Move the switch on the PCB to "WP=0"

14.You are now all done

(1) You can now click the Outro / ATA Reset button to take the drive out of vendor mode (With the 0225's you should hit this button a few times - this solves the "Open Tray Error")
(2) The drive properties show show that it is a PLDS DG-16D4S 0225

x360key Updated FAQ

At present,x360key is still in the process of development,yet the official always will release their new progress to let our users to know more infor about x360 development.

Folloing is a update FAQ about x360key

Configuring xKey - Fats

xKey requires a dump of the original firmware from your drive. This is copied to the xKey's SD card, when the xKey boots the firmware file its analysed, the drive type is identified and the drive key etc. are extracted.

If you have CFW

You should have a backup of the OFW (or all the information to recreate one) and it is this file that is used to configure xKey. There is no need to reflash your drive with OFW.

If you have a stock drive

a dump must be obtained using available tools (we recommend the Maximus Lizard 360).

Configuring xKey - Slims

xKey requires the file set (dummy.bin etc.) that can be created with available tools, these are copied to the xKey's SD card. When the xKey boots, the files are analysed, the drive type is identified and the drive key etc. are extracted.

If you have CFW

You should have a backup of the required files and they are used to configure xKey. There is no need to reflash your drive with OFW

If you have a stock drive

a dump must be obtained using available tools (we recommend the Maximus Lizard 360).

Firmware Dumping

At launch xKey can't dump the drive firmware. Updates, planned for shortly after release, will allow xKey to perform this task for you. There is no need to flash your drive and 0225+ owners can enjoy all the benefits of xKey without the hassle of swapping PCBs or waiting for an unlock hack.

Liteon DG-16D4S - Unlocked Replacement PCB for Xbox360

Liteon DG-16D4S,a new Unlocked Replacement PCB for Xbox360,released by team Xecuter. This item can fit all DG-16D4S drive versions and allow you to reprogram your firmware to the board and then to set it to write protect to secure against any accidental firmware corruption / erasing.

Liteon DG-16D4S Modchip Striking Features :

If you are suffering one of following issues,this item is specially for you:

1. you have a faulty Liteon DG-16D4S DVD in your Xbox 360

2.you are swapping your drive to another console and are unable to program your firmware due to write protection being enabled

What does it Compatibility

Fits all Liteon DG-16D4S Drives

Fits all Liteon DG-16D4S Driver

Fully compatible with 9504, 0225 and 0401 fw revisions

Write Protect enable / disable feature

Simply swap out the old board with your new board and you are good to go !

Easily programmable using the X360USB PRO or compatible SATA.

Notice  1.All replacement boards are shipped blank. You must program your consoles correct firmware version and drive key. 2.Please note this is for professional installers only. Do not buy this or attempt to install it if you are not highly skilled. You will have to remove the old chip and this includes removing all of the resin around the MT1335 chip and then desoldering the chip, and then soldering the new IC with the write protect enable / disable connections also.